This process includes the oil extraction phase and the surface processing phase. It encompasses methane emissions (fugitive emissions, flaring), produced water discharges, and direct energy use during the oil extraction process, including drilling, oil pumping, gas injection, and flaring. Flaring refers to the practice in the oil and gas industry of transporting combustible waste gases generated during various production processes to a flare system or waste gas combustion system for incineration. Additionally, emissions from spills associated with drilling and pumping operations are included in this inventory, but crude oil spills related to transportation and refining are not included. The production of crude oil and natural gas is often closely related, requiring material allocation, usually based on energy content to reflect scientific fairness and ensure reasonable distribution. Heavy oil reservoirs refer to reservoirs where the viscosity of crude oil under reservoir conditions exceeds 50 mPa·s. Crude oil in heavy oil reservoirs has high viscosity and poor fluidity, making it difficult to extract. Low-permeability oilfields with water cut greater than 90% refer to those where the water content in the produced fluid exceeds 90%; this provision assumes a water cut of 95%. The net calorific value of crude oil is 43.4 MJ/kg, with an average calorific value of natural gas at 36 MJ/Sm³. Modeled using representative data on production technologies, this dataset reflects the average production level in China. The dataset is based on literature data and has been optimized and modeled using the best available information from 2023.